Sensors
- $315.00
Customized as a permanent replacement for: J&J I330, I330 C2 & DSP12 respiration sensors. 20" adjustable elastic belt with quick release buckles allow for easy handling. 1 year warranty Reliable and consistent signal quality. Durable elastic construction resists malfunctioning. Modern construction and design. (package of 2)
- $170.00
Customized as a permanent replacement for: J&J I330, I330 C2 & DSP12 respiration sensors. 20" adjustable elastic belt with quick release buckles allow for easy handling. 1 year warranty. Reliable and consistent signal quality. Durable elastic construction resists malfunctioning. Modern construction and design.
- $1795.00
HEG (hemoencephalography) is the study of blood flow in the brain. More specifically, it is the study of voluntarily controlled blood flow or oxygenation in specifically chosen brain modules.
Please note: You must purchase the NX-AANSLUIT along with the HEG Sensor to use the with the NeXus system.
- $25.00
$25.00
$56.00
Single user reusable continence training EMG sensor for the NeXus System. Must also order the MBS Adaptor.
$56.00
Single user reusable continence training EMG sensors for the NeXus System. Must also order the MBS Adaptor.
$150.00
J & J Engineering Respiration Sensor and cable for the C2+
$75.00
J & J Engineering Non-Gel wrist to wrist ECG sensor/wrist band kit
$895.00
Oximetry Sensor. This Oximetry Sensor can be used with the Nexus-4, NeXus-10, NeXus-16 or neXus-32. It provides digital readings of the relative oxygen saturation level in the blood. It also provides pulse and heart rate information. The 4 pin brushed metal connector ensures a safe and reliable connection.
$300.00Two 33" pigtail cables with connector for the HEG Sensor . Use with the NeXus 4, 10 & 32
$25.00Replacement belt for the NX-RSP1 respiration sensor. Consists of 1 short and 1 long.
$360.00
BVP Headband Sensor for the NeXus-4, 10 & 16. Blood Volume Pulse Sensor
This BVP sensor monitors the relative blood flow in the hands (fingers) with near infrared light. This method is also know as photoplethysmography. (PPG) From the pulse signal the software can compute the heart rate. This sensor can be used to monitor HR, HRV (heart rate variability), bloodflow and pulse.We also recommend: NeXus-4, NeXus-10, NeXus-16, BVP Finger Sensor
$360.00
Blood Volume Pulse Sensor. This BVP sensor monitors the relative blood flow in the hands (fingers) with near infrared light. This method is also know as photoplethysmography. (PPG) From the pulse signal the software can compute the heart rate. That way it enables the user to monitor HRV (heart rate variability) in an easy way. Can be used for the Nexus 4 or 10
We also recommend: NeXus-4, NeXus 10, NeXus-16, Sensors, BVP Sensor for the NeXus 32, BVP Headband Sensor
$395.00
SCP (slow cortical potential) cable. This is an SCP electrode cable that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. It comes with sintered electrodes for optimum DC stability and a medical grade brushed metal connector. This cable requires a NX-REF-TP and EL-TP-RNG
$395.00
This is a dual channel multi-purpose electrode cable that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. This snap-on cable is suitable for recording EEG, EMG, ECG and EOG. Comes complete with a medical grade brushed metal connector. This cable requires the additional ground cable. Capable of performing EMG, EEG, EOG, EKG. Used with the NeXus-4, 10, & 16.
We also recommend: NeXus-4, NeXus-10, NeXus-16, NeXus-32, Ground Reference Cable, MB-Ear Clip Set, Norotrode 120 Electrodes, Norotrode 130 Electrodes, 4630 Pre-gelled Electrodes, 2RT3 EEG Electrodes
$395.00
2 channel cable for EEG & DC-EEG This is a dual channel (bi-polar) EEG RING electrode cable that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. It requires sintered RING electrodes (EL-TP-RNG) for optimum DC stability. The ring electrodes can be applied directly on the head (with paste) or snapped into the EasyCap EEG Cap. Used with the NeXus-4, 10, & 16.
Also take a look at:
$85.00
Ground cable for EEG, EMG, ECG, EOG ,SCP
This electrode cable with carbon coating is used for connecting the encoder ground to the client. When recording electrophysiological signals (EEG, EMG, ECG, EOG or SCP) a single ground is always required. This ground cable can be used in combination with the EXG or the SCP cable. Connect it to the Gnd. input of the NeXus-4, NeXus-10, NeXus-16 or NeXus-32.We also recommend: NeXus-4, NeXus-10, NeXus-16, NeXus-32, Sensors, EXG Sensor
$265.00
We offer this special series of 'force' sensors for the NeXus 10, 16 and 32. You can choose from a force range of 0-50 Newton, 0-500 Newton or 0-5000 Newton. Very sturdy design. The 24 bit design of NeXus provides high precision and reliable signals. Comes complete with a medical grade brushed metal connector and precision amplifier.
$360.00
SC/GSR Sensor. This is the NeXus Skin Conductance sensor capable of recording the electrical conductance or resistance (GSR) of the skin. With the ultra high 24 bit resolution of the NeXus it can resolve changes of less than 0.0001 microsiemens. Two finger sensors are included. Can be used with the Nexus 4, 10 or 16.
$150.00
Linked ear adapter sensor for EEG.. Must be used in conjuction with the NX-EXG2A sensor.
$360.00
The Nexus Respiration sensor monitors abdominal or chest breathings with high accuracy. It can be easily worn over or under the clothes, This sensor offers such high sensitivity that you can even observe the heart beat with it. It comes with a medical grade brushed metal connector.
$895.00
This Oximetry Sensor can be used with the NeXus-10, NeXus-16 or neXus-32. It provides digital readings of the relative oxygen saturation level in the blood. It also provides pulse and heart rate information. The 4 pin brushed metal connector ensures a safe and reliable connection.
$275.00
High Resolution Skin Temperature. In combination with the NeXus-10, this highly sensitive temperature sensor can monitor skin temperature changes smaller than 0.0001 (1/10000th) degree! The sensor can be applied on the hands or other parts of the body. The medical grade brushed metal connector ensures a safe and reliable connection.
$999.00
The NTI is an add-on for the Nexus device family that already supports the SpO2 interface. External stimuli(triggers) provided to the NTI are forwarded to the Nexus device. These triggers can be used to perform so called ERP/EP measurements.
$39.00
The (Ground)-Splitter is used to connect two ground cables to one and the same NeXus. With this cable you could connect two people to one NeXus for doing two persons EMG/ECG/EOG/EEG
Please note that by splitting the ground the noise level on your signal will increase. If you use peripheral (AUX) sensors, you can connect as many people as there are AUX channels available, e.g. 4 respiration in NeXus-10.
$250.00
1 channel cable for EEG, EMG, ECG & EOG!
This is a multi-purpose bi-polar electrode cable for the NeXus-32 and NeXus-16 that uses carbon coating and active shielding technology for low noise and virtual absence of movement artifacts. This snap-on cable is suitable for recording EEG, EMG, ECG and EOG. (ground ref. cable required)
$360.00
BVP Headband Sensor for the NeXus-32. Blood Volume Pulse Sensor
This BVP sensor monitors the relative blood flow in the hands (fingers) with near infrared light. This method is also know as photoplethysmography. (PPG) From the pulse signal the software can compute the heart rate. This sensor can be used to monitor HR, HRV (heart rate variability), bloodflow and pulse.
$360.00
Blood Volume Pulse sensor for the NeXus-32. Blood Volume Pulse Sensor
This BVP sensor monitors the relative blood flow in the hands (fingers) with near infrared light. This method is also know as photoplethysmography. (PPG) From the pulse signal the software can compute the heart rate. This sensor can be used to monitor HR, HRV (heart rate variability), bloodflow and pulse. Used with the NeXus-32
$80.00
Ground cable for EEG, DC-EEG & SCP.
This RING electrode cable with carbon coating is used for connecting the encoder ground to the client. When recording DC-EEG signals (SCP) a single ground is always required. This ground cable can be used in combination with the EEG or the SCP cable. The ring electrode can be applied directly on the head (with paste) or snapped into the EasyCap EEG Cap. For use with the NeXus line of bio-and neurofeedback equipment.
$360.00
This is the NeXus-32 Skin Conductance sensor capable of recording the electrical conductance or resistance (GSR) of the skin. With the ultra high 24 bit resolution of the NeXus it can resolve changes of less than 0.0001 microsiemens. Two finger sensors are included.
$360.00
Respiration Sensor for the NeXus-32
$275.00
Temperature sensor for the NeXus-32
